Shop - Page 2 of 13 - Vermont Freehand

Chamber Spade Bits

$16.00 – $70.00

Select options Details
5″ Hook and Loop Sanding Pads

$8.50 – $22.00

arbor and pad sold separately 5″ hook and loop sanding pads arbor will fit ⁵⁄₈” shaft, locked with set screw adapter sleeve available to convert to ¹⁄₂” motor shaft (please send note if needed) ⁵⁄₁₆ x 24tpi threaded bolt coming off pad this uses it's own arbor, which is different from the Beall arbor

Select options Details
Rubber Bit Sleeves

$4.00 – $30.00

Select options Details
Round Saddle Vulcanite

$2.75 – $5.25

all regular vulcanite stems = $2.75 - $5.25 each

Select a stem number by locating the Diameter and Length in the table below

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Conversion chart

$5.00

A must have for any woodworker Inch fractional to inch decimal to millimeter measures 17.25″ x 22″ backside is a poster of the products we sell

Add to cart Details
Polishing Compound

$6.00 – $7.50

Select options Details
Round Taper Vulcanite

$2.75 – $5.25

all regular vulcanite stems = $2.75 - $5.25 each

churchwardens available here.

Select a stem number by locating the Diameter and Length in the table below.

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Fancy Vulcanite

$2.75 – $5.25

all regular vulcanite stems = $2.75 - $5.25 each

Select a stem number by locating the Diameter and Length in the table below.

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Oval Taper Vulcanite

$2.75 – $4.00

all regular vulcanite stems = $2.75 - $5.25 each

Select a stem number by locating the Diameter and Length in the table below

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Oval Saddle Vulcanite

$2.75 – $4.00

all regular vulcanite stems = $2.75 - $5.25 each

Select a stem number by locating the Diameter and Length in the table below

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Diamond Taper Vulcanite

$2.75 – $4.00

all regular vulcanite stems = $2.75 - $5.25 each

Select a stem number by locating the Diameter and Length in the table below

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Diamond Saddle Vulcanite

$2.75 – $4.00

all regular vulcanite stems = $2.75 - $5.25 each

Select a stem number by locating the Diameter and Length in the table below

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Square Tapers Vulcanite

$2.75 – $4.00

all regular vulcanite stems = $2.75 - $5.25 each

Select a stem number by locating the Diameter and Length in the table below

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Square Saddle Vulcanite

$2.75 – $4.00

all regular vulcanite stems = $2.75 - $5.25 each

Select a stem number by locating the Diameter and Length in the table below

all stems need to have tenon machined and be sanded true and polished, these are stem blanks, not finished stems

Select options Details
Churchwarden Stems

$2.75 – $6.00

#2013 - 8" x 1/2" (Italian, Giudici) #155 - 4 7/8" x 1/2" (Italian, Giudici) all lengths do not include tenon

Select options Details
NYH Black German Ebonite

$3.00 – $225.00

PLEASE NOTE - we will cut half meters and full meters into 1/4m lengths to fit inside shipping box. If you require full length rods in half meter or full meter, please email us for directions to make an additional payment towards shipping.

Select options Details
Black Japanese Plate Ebonite

$6.00 – $21.00

approximately 5"-6" squares

Select options Details
Acrylic Rods

$5.00 – $32.00

PLEASE NOTE - we will cut half meters and full meters into 1/4m lengths to fit inside shipping box. If you require full length rods in half meter or full meter, please email us for directions to make an additional payment towards shipping. 20mm diameter Italian Acrylic rods

Select options Details
Black Japanese Ebonite

$0.75 – $300.00

PLEASE NOTE - we will cut half meters and full meters into 1/4m lengths to fit inside shipping box. If you require full length rods in half meter or full meter, please email us for directions to make an additional payment towards shipping.

Select options Details
Sale!

Countersink Tool

Original price was: $10.00.Current price is: $7.50.

Countersink Tool For Countersinking Mortise Hole At Shank End

Add to cart Details
Stem Tightener Kit

$10.00

For Tightening Loose Stems. Directions Included.

Add to cart Details
Square sandpaper

$7.00

Assortment 5 Grits 180, 220, 320, 400, 600 4.5" x 5.5" pieces highest grade sandpaper lower grits are cloth backed

Add to cart Details
PIMO’s Guide to Pipe Crafting at Home

$20.00
GUIDE TO PIPE CRAFTING AT HOME 112 pages, 190 illustrations, Soft Cover LEARN HOW TO...

Make Briar Pipes

Craft Freehands

Choose The Materials For Your Pipe

Cut Several Pipes From One Briar Piece

Drill The Holes By Hand Or In A Drill Press

Fit, Bend and Finish Stems

Sand, Stain and Polish Pipes

Carve Briar
Add to cart Details
Adjustable Tenon Turning Tool & Parts

$3.50 – $80.00

Turns tenons to over 3/8" diameter using a drill press, an electric hand drill or mounted on a motor. Directions included. Comes with the tenon turning tool, 3 allen wrenches, pilot drill, directions, and a dozen stems to use while aligning to desired finished tenon diameter.

Select options Details